Case Studies

Develop three separate floor designs based around images they had seen and their brand colours.

We were tasked with making good a floor that was not up to the customer’s expectations. We had to grind away an existing coating, make the floor even, and then apply the flake system, all in one day.

Stomp Resins Ltd were asked to work alongside a specialist surveying company on a large project in Ireland. The specification of the racking was changed, making it higher, which meant that the floor levels fell outside the tolerances for the fork lift trucks.

We were asked to look at this project to see if we could give the customer a polished concrete floor for the new offices, canteen and meeting rooms they were having built. 

We were asked to pump an industrial floor levelling compound using our three phase pump over 5500m2 as part of a refurbishment of the unit.

Stomp Resins Ltd were asked to prepare and coat this Coach Workshop. The customer wanted a resin coated floor with walkways, with floating pads in front of the roller shutter doors and yellow and black chevrons around the pits in order to demark them.

We were asked to pump an industrial floor levelling compound using our three phase pump over 5500m2 as part of a refurbishment of the unit.

Our customer had asked us to design a hardwearing, easy-to-clean floor for the Beauty Salon they were opening in Birmingham. We recommended an ‘epoxy microtopping’, which would be very hardwearing and have very good stain resistance